1. 1. 毕业设计（论文）的内容、要求、设计方案、规划等
1、针对实时发泡工艺进行探索性研究，其涉及主要影响因素包括：发泡原材料的选择和配比、反应时间和温度、含水率等
2、针对实验室木质复合材料制备进行优化设计,其涉及主要影响因素包括：热压温度、热压时间、含水率、密度、木质组分类别、木质组分含量等
3、在以上两点基础上，依据国家标准对上述材料进行性能测评，测评内容主要涉及相关物理性能和力学性能
2. 参考文献（不低于12篇）
1. Gatenholm P, Mathiasson A (1992) Biodegradable natural composites I (processing and properties). J Appl Polym Sci45:166716772. Keller A (2003) Compounding and mechanical properties of biodegradable hemp fiber composites. Compos Sci Technol 63:130713163. Shibata M, Ozawa K, Teramoto N, Yosomiya R, Takeishi H(2003) Biocomposites made from short Abaca fiber and biodegradable polyesters. Macromol Mater Eng 288:35434. Thakur VK, Singha AS (2010) Physico-chemical and mechanical characterization of natural fibre reinforced polymer composites.Iran Polym J 19:3165. Lee SH, Ohkita T, Kitagawa K (2004) Eco-composite frompoly(lactic acid) and bamboo fiber. Holzforschung58:5295366. Mortazavi SB, Rasoulzadeh Y, Yousefi AA, Khavanin A (2010)Properties of modified bitumen obtained from vacuum bottom by adding recycled waste polymers and natural bitumen. Iran Polym J 19:1972057. Awal A, Cescutti G, Ghosh SB, Mussig J (2011)Interfacial studies of natural fibre/polypropylene composites using single fibre fragmentation test (SFFT). Compos Part A Appl Sci Manuf 42:50568. Kamdem DP, Jiang HH, Cui WN, Freed J, Matuana LM (2004) Properties of wood plastic composites made of recycled HDPE and wood flour from CCA-treated wood removed from service.Compos Part A Appl Sci Manuf 35:3473559. Ashori A, Nourbakhsh A (2009) Characteristics of wood-fiber plastic composites made of recycled materials. Waste Manag 29:1291129510. Jayaraman K, Bhattacharya D (2004) Mechanical performance of wood fibre-waste plastic composite materials. Resour ConservRecycl 41:307319
以上是毕业论文任务书，课题毕业论文、开题报告、外文翻译、程序设计、图纸设计等资料可联系客服协助查找。
